Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Windscreen on the Piaggio Vespa 50 Sprint?

Model: Piaggio Vespa 50 Sprint
Part: Windshield

Video tutorial

To install the windscreen on the Piaggio Vespa 50 Sprint, first insert the appropriate mounting brackets that will support the windscreen. These should be placed inside the holes located at the bottom of the front fairing, securing them in place with the appropriate bolts.

Once the brackets are in place, position the windscreen in its housing, securing it to the brackets with the correct rubber grommets and fixing screws. After installation, ensure that the windscreen is securely fastened.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Replace the Variator on a Piaggio Vespa 50 Sprint
How to Replace the Variator on a Piaggio Vespa 50 Sprint
Vespa 50 Sprint To replace the variator on a Piaggio Vespa 50 Sprint, you need to loosen the screws that secure the transmission cover located on the left side of th…
How to change the engine oil on the Piaggio Vespa 50 Sprint scooter?
How to change the engine oil on the Piaggio Vespa 50 Sprint scooter?
Vespa 50 Sprint In this tutorial, you will learn how to change the engine oil on the Piaggio Vespa 50 Sprint scooter, a very simple operation to be carried out every…
How to Replace the Ignition Switch on a Piaggio Vespa 50 Sprint?
How to Replace the Ignition Switch on a Piaggio Vespa 50 Sprint?
Vespa 50 Sprint To replace the ignition switch on the Piaggio Vespa 50 Sprint, loosen the screws that secure the internal fairing of the scooter located under the ha…

How to Replace the Front Brake Pads on an Aprilia RS 457?

The front brake pads on an Aprilia RS 457 can be replaced by unscrewing the bolts that secure the caliper to the corresponding disc, allowing it to be removed: once the caliper has been removed, you can slide out the pin that holds the pads in their place. At this point, remove the old ones to insert the new ones: these must be secured with the appropriate pin, so that you can then reposition the caliper onto the disc. Now, secure the caliper with the bolts to ensure that the brake is functioning.

Watch the video!


by ScegliAuto

More videos