|
Do it yourself
| |||
| ||||
|
Model: Peugeot Citystar 125
To replace the front indicator bulb on the Peugeot Citystar 125, loosen the screws located on the inside of the front fairing, just below the handlebars. This will allow you to remove the side front fairing along with the corresponding side indicator light. Disconnect the connector, and the bulb inside can be extracted and replaced with a new spare part. After replacement, reinsert the side fairing, reconnect the connector, and secure it with the screws.
Updated on 11 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Citystar 125
To replace the front indicator bulb on a Peugeot Citystar 125, first remove the corresponding front headlamp. Once the headlamp is removed from its h…
Citystar 125
To replace the headlight bulb on a Peugeot Citystar 125, loosen the screws that secure the optical unit within its housing: these screws are located …
Citystar 125
To replace the headlight bulb on the Peugeot Citystar 125, you need to unscrew the screw located at the centre of the front grille, so that the centr…
|
How to Replace the Tyres on the Husaberg FE 450
In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
