Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear light bulbs of the Peugeot 307.

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Tail light bulb

When a taillight bulb of the Peugeot 307 burns out, we must replace it as soon as possible for our safety and to avoid fines. Let's position ourselves near the headlight that contains the bulb to be replaced, open the trunk hood, unscrew the screw on the side with a 10mm wrench, move the gasket and partially remove the carpet, unscrew the screw that secures the headlight and remove it by disconnecting the electrical connector. Rotate the headlight and release the plate that contains the bulbs, remove the burnt one and replace it with a new one, put the plate back, connect the connector, put the headlight back in place and secure it with its screws, adjust the carpet and the gasket.

Posted on 19 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs in a Peugeot 307?
How to Replace the Headlight Bulbs in a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) In this tutorial, you will see how to replace the front headlight bulbs in a Peugeot 307, a very simple and quick operation. First, ensure the key is…
How to change the bulb of a rear headlight of a Peugeot 307
How to change the bulb of a rear headlight of a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) The first step to replace the bulb of a rear headlight of a Peugeot 307 car is to open the trunk of the vehicle and lift the internal side panel on t…
How to Replace the Rear Headlamp Bulbs on a Peugeot 307
How to Replace the Rear Headlamp Bulbs on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) How to replace the rear headlamp bulbs on a Peugeot 307? This is a very simple operation. Open the boot lid, then remove the fabric cover located on …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos