Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install LED bulbs on a Peugeot 108

Model: Peugeot 108 MK 1 - Years 2014-2021
Part: Headlight bulb

Changing the bulbs on this type of car is quite simple. First of all, turn off the car and wait for the headlights to cool down. Open the hood and locate the back of the headlight, there is a plastic cap to remove. Disconnect the electrical connector, unclip the retaining clip, and remove the old bulb. Now you can switch to LED bulbs, but make sure they are compatible with your model first. Insert the new LED bulb into the same housing, secure it properly, and reconnect everything. Before closing the cap, turn on the headlights to check if it works. If everything is okay, put the cap back on and you will have better visibility on the road. If you don't feel comfortable doing these operations on your own, contact a specialized workshop.

Posted on 23 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the third brake light of the Peugeot 108.
Peugeot 108 (2014-2021 / MK 1) These brief and simple steps will show us how to disassemble and replace the rear light and the bulbs of the third brake light on the Peugeot 108. Fi…
Replacement of the front headlight bulb of the Peugeot 108
Replacement of the front headlight bulb of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) Today we will discover the step-by-step instructions on how to disassemble and replace the headlight bulb of the Peugeot 108. First, open the hood of…
Where is the OBD port of the Peugeot 108 located?
Where is the OBD port of the Peugeot 108 located?
Peugeot 108 (2014-2021 / MK 1) In the following guide, we will help you find the OBD port inside the cabin of your Peugeot 108 in just a few seconds. First, you need to reach the d…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos