Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the front bulbs of a Peugeot 108.

Model: Peugeot 108 MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Light bulb

Video tutorial

Let's see how to change the front bulbs of a Peugeot 108: open the hood and access the headlight from the engine compartment; locate the bulb holder and turn it a quarter turn counterclockwise; disconnect the electrical connector and remove the old bulb.

Insert the new HIR2 bulb without touching the glass (use gloves) and reconnect the electrical connector.

Reinstall the holder in the headlight by turning it a quarter turn clockwise until it locks in place. To replace the PY21W bulb for the turn signals, the housing is located near the main headlight.

Again, turn it counterclockwise, remove the bulb, and replace it with the new one. Just put the holder back in place by turning it clockwise, and we're done. The position lights cannot be replaced manually.


Posted on 7 December 2025 by ScegliAuto


Related tutorials

Position and function of the air conditioning pressure sensor on the Peugeot 108
Position and function of the air conditioning pressure sensor on the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) The air conditioning pressure sensor, also known as a pressure switch, is a fundamental component in the air conditioning system of our Peugeot 108: …
Where is the OBD port located on the Peugeot 108?
Where is the OBD port located on the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) The OBD port on a Peugeot 108 is located inside the cabin, specifically under the steering wheel. The port is easily recognisable due to its white co…
How to Replace the Rear Wiper Blade on the Peugeot 108
How to Replace the Rear Wiper Blade on the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) When transitioning from warm to cold months, it is necessary to replace your vehicle's wiper blades. Today, you will learn how to replace the rear wi…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos