|
Do it yourself
| |||
| ||||
How to replace the headlight bulb on a Peugeot Expert
Model: Peugeot Expert
- Years:
2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Video tutorial
To replace the headlight bulb on a Peugeot Expert (2016-2024), open the bonnet and locate the internal cover panel of the headlamp unit. Remove the rubber protective cover by pulling the tab. Disconnect the electrical connector and release the retaining spring. Extract the bulb, ensuring to align the metal part with the slots in the housing. Before handling the new bulb, use a clean cloth or tissue to avoid touching the glass with your fingers: moisture and grease from your skin can cause darkening and rapid breakage of the bulb. If the glass is accidentally touched, clean it with methylated spirits. Insert the new bulb into the holder and reconnect the connector. Reposition the retaining spring and press until it clicks. Replace the protective cover, ensuring it is sealed correctly around the perimeter to maintain integrity. Test the headlight operation. The procedure takes about 30 minutes and does not require special tools. For Full LED headlights, however, it is not possible to replace the individual bulb: you must contact an authorised workshop.
Posted on 14 October 2026 by ScegliAuto
Related tutorials
Peugeot Expert
(2008-2016 /
Mark2, MK 2)
This video tutorial shows how to replace the front headlamp bulb on a Peugeot Expert. The replacement can typically be done independently by purchasi…
Peugeot Expert
(2008-2016 /
Mark2, MK 2)
Replacing the headlight bulb of the 2014 Peugeot Expert is a simple and quick operation to be carried out independently. To perform the replacement, …
Peugeot Expert
(2016-2025 /
Mark3, MK 3)
In order to replace the headlight bulb of the Peugeot Expert, you need to open the hood so that you can access the inside of the engine compartment: …
Other guides you may be interested in
|
How to Open a Stuck Trunk on a Mercedes C-Class W205
Like all modern vehicles, the Mercedes C-Class has the option to open the trunk from the inside. If the trunk does not open from the outside, you can enter the vehicle and, by pressing the button located on the top of the backrest, fold down the center seat. From here, you can lower the other two seatbacks to create a flat surface, allowing you to slide down to the internal trunk lock. Here, you will see a black handle that, when lifted, will give you access to a strap. Pulling the strap will allow you to reach the lever of the internal mechanism. Simply lift it to allow the trunk to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.097
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |