Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock on the Iveco Daily?

Model: IVECO Daily MK 5 - Years 2014-2026
Part: Clock

To adjust the clock of the Iveco Daily, you will need to turn on the instrument panel by inserting the ignition key into the ignition switch and turning it: at this point, you can use the buttons in the center of the dashboard. Hold down the SET button, and you will notice that the clock starts flashing: now you can press the buttons to lower and raise the beam of light of the headlights. With these buttons, you can respectively modify the hours and minutes: at the end of the adjustment, you can turn off the instrument panel.

Posted on 28 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock on the Iveco Daily?
How do you set the clock on the Iveco Daily?
IVECO Daily (2014-2026 / MK 5) To adjust the clock of the Iveco Daily, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: once the …
How to set the clock on the Iveco Daily
How to set the clock on the Iveco Daily
IVECO Daily (2006-2020 / MK 4) Today we will explain how to set the clock on an Iveco Daily vehicle. To perform this simple operation, we need to turn on the instrument panel and p…
How to Set the Clock on the Iveco Daily?
How to Set the Clock on the Iveco Daily?
IVECO Daily (2014-2026 / MK 5) To set the clock on the Iveco Daily, you need to turn on the instrument panel so you can navigate the menu using the controls on the steering wheel. …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos