Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlamp Bulb on an Iveco Daily

Model: IVECO Daily
Part: Headlight

If a headlamp bulb on your Iveco Daily has blown, replace it as soon as possible. Open the bonnet and remove the four screws securing the grille in front of the radiator. Using a socket spanner, undo the two bolts, one at the top and the other at the bottom, on the headlamp frame. Also, remove the bolt inside and, using a screwdriver, detach the headlamp by pulling out the pressure pin. Disconnect the electrical connector and rotate the headlamp. At the back of the headlamp, there are caps protecting the bulb housings; select the one corresponding to the bulb you need to replace and open it. You will find the electrical connector, which you will remove, and then release the spring clip that holds the bulb in place so you can pull it out. Insert the new bulb, taking care not to touch it with your bare fingers, reattach the spring clip, restore the electrical connection, and replace the protective cap. Refit the headlamp by reversing the previous steps.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on the Iveco Daily
How to Replace the Front Headlamp Bulb on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) The following video tutorial shows how to independently replace the front headlamp bulb on the Iveco Daily. Open the front bonnet and position yourse…
How to Replace the Front Bulb of an Iveco Daily
How to Replace the Front Bulb of an Iveco Daily
IVECO Daily (2006-2020 / MK 4) Before starting, open the front bonnet of your Iveco Daily. Begin by removing the rear cover of the bulb by simply prising it off. This will give you…
How to Replace the Headlamp Bulb on an Iveco Daily?
How to Replace the Headlamp Bulb on an Iveco Daily?
IVECO Daily (2006-2020 / MK 4) To replace the headlamp bulb of the external rear-view mirror on the Iveco Daily, use a flat screwdriver to lever inside the groove formed between th…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos