Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the clock on the Iveco Daily

Model: IVECO Daily MK 4 - Years 2006-2020
Part: Clock

Today we will explain how to set the clock on an Iveco Daily vehicle. To perform this simple operation, we need to turn on the instrument panel and press the down arrow button for a few seconds to access the time settings. When the clock starts flashing on the display, we can adjust the hours by pressing the arrow buttons; by holding them down, we set the hours and perform the same operation to set the minutes. Once the time reset is complete, we restart the instrument panel to finish the operation. This procedure is valid for all Iveco Daily vehicles produced from 2006 to the present.

Posted on 12 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock on the Iveco Daily?
How do you set the clock on the Iveco Daily?
IVECO Daily (2014-2026 / MK 5) To adjust the clock of the Iveco Daily, you will need to turn on the instrument panel by inserting the ignition key into the ignition switch and turn…
How do you set the clock on the Iveco Daily?
How do you set the clock on the Iveco Daily?
IVECO Daily (2014-2026 / MK 5) To adjust the clock of the Iveco Daily, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: once the …
How to adjust the time on the instrument panel of the Iveco Daily
How to adjust the time on the instrument panel of the Iveco Daily
IVECO Daily (2014-2026 / MK 5) Today we will explain how to adjust the time on the instrument panel of the Iveco Daily in a simple and quick way. To set the time, we need to turn o…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos