Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on the Iveco Daily?

Model: IVECO Daily MK 5 - Years 2014-2026
Part: Clock

To set the clock on the Iveco Daily, you need to turn on the instrument panel so you can navigate the menu using the controls on the steering wheel. First, press the upper button on the right-hand spoke, then scroll through the options using the buttons on the left-hand spoke. In particular, the buttons with the + and - symbols should be used to adjust both the hours and the minutes. Once the hour has been correctly adjusted, confirm it by pressing the button on the right-hand spoke, and finally, turn off the panel.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the clock on the Iveco Daily
How to set the clock on the Iveco Daily
IVECO Daily (2006-2020 / MK 4) Today we will explain how to set the clock on an Iveco Daily vehicle. To perform this simple operation, we need to turn on the instrument panel and p…
How do you set the clock on the Iveco Daily?
How do you set the clock on the Iveco Daily?
IVECO Daily (2014-2026 / MK 5) To adjust the clock of the Iveco Daily, you will need to turn on the instrument panel by inserting the ignition key into the ignition switch and turn…
How to Set the Time in the Iveco Daily Van?
How to Set the Time in the Iveco Daily Van?
IVECO Daily In this tutorial, see how to set the time in the Iveco Daily van, a very simple and quick operation to perform after replacing the battery or followi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos