Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the third brake light bulb of a Renault Kangoo 2

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part:

Through today's video, we are shown the procedure for changing the third brake light bulb of a Renault Kangoo 2. So first of all, we need to open the rear trunk door and look for the two holes near the back of the third brake light where the two fixing screws are placed to hold the light in position. Once we have located the holes, we insert a crosshead screwdriver to unscrew the two fixing screws. Once this is done, we can remove the third brake light and then its bulb, so we insert a new bulb and finally reassemble everything.

Posted on 16 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Third Brake Light Bulbs on the Renault Kangoo
Replacing the Third Brake Light Bulbs on the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Let's go through the steps to remove and replace the bulbs of the third brake light on the Renault Kangoo. First, open the rear tailgate and start by…
How to Remove the Third Brake Light and Replace the Bulbs on a Renault Kangoo
How to Remove the Third Brake Light and Replace the Bulbs on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Below are the instructions for removing and replacing the third brake light and its bulbs on a Renault Kangoo. First, open the rear tailgate of the v…
How to replace the third brake light on a Renault Kangoo
How to replace the third brake light on a Renault Kangoo
Renault Kangoo (2020-2026 / KFK, MK 3, FFK) In this video, we can see how to change the third brake light on a Renault Kangoo when needed: we open the door and see that there are two pins insid…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos