Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulbs on the Renault Kangoo 2?

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Light bulb

See other generations:
Video tutorial

Want to replace the front bulbs on your Renault Kangoo 2 without paying for an auto electrician? No problem. Start by opening the front bonnet and securing it. Next, disconnect the electrical connectors and remove the rubber cap protecting the bulbs.

Extract the blown bulb and replace it with a new one, then reposition the rubber cover and reconnect the electrical connector. Finally, test the lights to ensure they are working.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Replacing Headlamp Bulbs on Kangoo
Replacing Headlamp Bulbs on Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Do you want to replace the front bulbs of the car? Let's see how to disassemble the bulbs of the front headlamp on Kangoo. Lift the bonnet and locate…
How to Replace the Rear Light and Bulbs of the Renault Kangoo
How to Replace the Rear Light and Bulbs of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) This guide provides instructions for removing and replacing the rear light and its bulbs on the Renault Kangoo. First, open the rear tailgate and sta…
How to Replace the Rear Light Bulbs on a Renault Kangoo
How to Replace the Rear Light Bulbs on a Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) Below are the instructions that will allow you to remove and replace the rear light bulbs on a Renault Kangoo. First, open the rear doors of the vehi…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos