Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Headlamp Bulbs on Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

Do you want to replace the front bulbs of the car? Let's see how to disassemble the bulbs of the front headlamp on Kangoo. Lift the bonnet and locate the plastics to remove.

Remove the cover caps from behind the headlamp with a screwdriver: uncover the front headlamp. Once you find the bulb holders inside the headlamp (located in the internal part of the headlamp), remove them: pull the bulb holders out of the headlamp and extract the damaged bulb with the help of a screwdriver.

Remove the damaged bulbs from inside the headlamp. Install the new bulbs of the same size and voltage.

Change all damaged bulbs.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to disassemble the front headlight of the Renault Kangoo
How to disassemble the front headlight of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) These short and simple steps will allow us to disassemble and replace the front headlight and its bulbs of the Renault Kangoo. First, we open the hoo…
How to Remove the Front Headlamp on a Renault Kangoo?
How to Remove the Front Headlamp on a Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) Although the vehicle in question is different from the one shown in the video, a 2019 Fiat 500, it is important to note that the procedure for removi…
How to replace the front headlight bulb of the Renault Kangoo
How to replace the front headlight bulb of the Renault Kangoo
Renault Kangoo (2020-2026 / MK 3, KFK, FFK) The steps to replace the front headlight bulb of a Renault Kangoo are simple and quick to perform independently. The first step is to pull the lever …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos