Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front headlight of the Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Headlight

These short and simple steps will allow us to disassemble and replace the front headlight and its bulbs of the Renault Kangoo. First, we open the hood of the car and start unscrewing the fixing screws located on the top of the front bumper; we gently release it on the sides to detach and remove it, thus accessing the screws of the headlight assembly, as shown in the video. At this point, we disconnect the electrical connector of the front headlight to remove it, replacing the bulbs if necessary; all that's left is to install the new front headlight!

Posted on 17 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove Headlight Bulbs on Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Replace the front headlight bulbs on a Renault Kangoo. Open and lift the front bonnet. Using a suitable screwdriver, remove the plastic cover at the …
How to disassemble the front headlights of the Renault Kangoo MK1
How to disassemble the front headlights of the Renault Kangoo MK1
Renault Kangoo (1997-2008 / MK 1, KC, KW) In this video, we see how to remove the front headlights of the Renault Kangoo MK1: we open the hood and unscrew the two cross screws at the top near…
How to Replace the Rear Light Bulbs on a Renault Kangoo
How to Replace the Rear Light Bulbs on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Below are the instructions that will allow you to remove and replace the rear light bulbs on a Renault Kangoo. First, open the rear doors of the vehi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos