Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front headlight of the Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

Today's main instructions will show us how to disassemble and replace the front headlight of the Renault Kangoo. First, we open the hood of the car and start unscrewing the screws holding the front bumper, which are located at the top; we then unscrew the additional screws located on both sides of the front wheel arches, as shown in the video.

At this point, it will be possible to unscrew all the screws of the headlight assembly, disconnecting the electrical connector of the lights to remove it; we replace the bulbs or the entire front headlight, finally reassembling the bumper.


Posted on 1 October 2025 by ScegliAuto


Related tutorials

Replacing Headlamp Bulbs on Kangoo
Replacing Headlamp Bulbs on Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Do you want to replace the front bulbs of the car? Let's see how to disassemble the bulbs of the front headlamp on Kangoo. Lift the bonnet and locate…
How to disassemble the front headlight of the Renault Kangoo
How to disassemble the front headlight of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) These short and simple steps will allow us to disassemble and replace the front headlight and its bulbs of the Renault Kangoo. First, we open the hoo…
How to Remove Headlight Bulbs on Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) Replace the front headlight bulbs on a Renault Kangoo. Open and lift the front bonnet. Using a suitable screwdriver, remove the plastic cover at the …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos