Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the bumper of the Renault Kangoo 2?

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Front bumper

See other generations:
Video tutorial

Although the purpose of the video guide presented here is the disassembly of the engine, we can still consider it as there is a section dedicated to the removal of the front bumper. Before reaching it, it is necessary to first remove the front grille, bolted, then proceed to remove the pins of the upper and lower fascia of the same bumper, completing everything with the side ones located behind the wheel arches.

When pulling it forward to detach it from the body, it is important to remember that behind it there is the connector of the electrical cables that must be disconnected.


Posted on 17 August 2025 by ScegliAuto


Related tutorials

Removing the Rear Bumper on a Renault Kangoo
Removing the Rear Bumper on a Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) These brief and simple steps will show you how to remove and replace the rear bumper on a Renault Kangoo. First, move to the rear of the vehicle and …
How to Remove the Rear Bumper on a Renault Kangoo?
How to Remove the Rear Bumper on a Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) To remove the rear bumper on a Renault Kangoo, open the tailgate to access the screws located along its lower trim. Next, loosen the screws at the bo…
How to Remove the Rear Bumper of the Renault Kangoo
How to Remove the Rear Bumper of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) To remove the rear bumper of the Renault Kangoo, open the rear tailgate to access and loosen the screws securing the bumper from the top. Once these …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos