Do it yourself
| ||||
|
Renault Kangoo - Video tutorial
Model: Renault Kangoo
MK 2, FC, FW
- Years 2007-2021 Whether it is damage to its structure, the need for maintenance of other parts of the vehicle, or simply to renew the color or change it with a different one, the bumper of the Renault Kangoo requires a specific sequence of interventions in order to be disassembled. It starts with opening the hood, removing the strip installed on the front grille and the headlights, removing the grille itself by levering on the appropriate stops, unhooking the perimeter stops of the lower area of the bumper, and avoiding the fixing pins of the upper area. All that's left is to pull it forward, detaching it from the car.
Posted on 1 March 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.045
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |