Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Rear bumper

See other generations:
Video tutorial

To remove the rear bumper of the Renault Kangoo, open the rear tailgate to access and loosen the screws securing the bumper from the top. Once these are loosened, you can also loosen the screws located inside the rear wheel arches. Next, unscrew the screws that secure the rear light units, removing them from their housing.

The screws underneath that secure the bumper can then be loosened, allowing you to detach the old bumper and replace it with a new one.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper on a Renault Kangoo
Removing the Rear Bumper on a Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) These brief and simple steps will show you how to remove and replace the rear bumper on a Renault Kangoo. First, move to the rear of the vehicle and …
How to Remove the Rear Bumper on a Renault Kangoo?
How to Remove the Rear Bumper on a Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) To remove the rear bumper on a Renault Kangoo, open the tailgate to access the screws located along its lower trim. Next, loosen the screws at the bo…
How to disassemble the front bumper of the Renault Kangoo
How to disassemble the front bumper of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today we will discover the instructions that will allow us to disassemble and replace the front bumper of the Renault Kangoo, in simple steps. First,…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos