Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear bumper of the Renault Kangoo

Model: Renault Kangoo MK 1, KC, KW - Years 1997-2008
Part: Rear bumper

These short and simple steps will show us how to disassemble and replace the rear bumper of the Renault Kangoo. First, let's move to the rear of the car and start by opening the rear tailgate of the trunk; then unscrew the four T30 torx screws found on the top of the bumper, releasing it afterwards on both sides of the rear wheel arches, as shown in the video. At this point, gently detach the bumper on the sides until completely removing it; then install the new bumper, following the reverse procedure!

Posted on 23 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper on a Renault Kangoo?
How to Remove the Rear Bumper on a Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) To remove the rear bumper on a Renault Kangoo, open the tailgate to access the screws located along its lower trim. Next, loosen the screws at the bo…
How to disassemble the front bumper of the Renault Kangoo
How to disassemble the front bumper of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today we will discover the instructions that will allow us to disassemble and replace the front bumper of the Renault Kangoo, in simple steps. First,…
How do you remove the rear bumper of the Renault Kangoo?
How do you remove the rear bumper of the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) In order to remove the rear bumper of the Renault Kangoo, you need to open the rear hatch so that you can locate and loosen the screws that secure th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos