Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the front headlight in the Renault Kangoo?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Headlight

Although the car in question is different from the one shown in the video, which is a 2019 Fiat 500, it is important to emphasize that the procedure for disassembling the front headlight is similar, so the guidelines do not differ. Regardless of the reasons that drive us to perform this work, first of all, we must remove the bumper, held in place by screws at the top and bottom, then remove those from the wheel arch and once this is done, the bumper can be pulled forward, and make space to unscrew the locking screws of the headlight itself. Pulled away from its seat, the aforementioned headlight, it should be remembered to disconnect the rear pins for the bulb power supply.

Posted on 5 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front headlight of the Renault Kangoo
How to disassemble the front headlight of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) These short and simple steps will allow us to disassemble and replace the front headlight and its bulbs of the Renault Kangoo. First, we open the hoo…
How to Remove Headlight Bulbs on Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Replace the front headlight bulbs on a Renault Kangoo. Open and lift the front bonnet. Using a suitable screwdriver, remove the plastic cover at the …
How to disassemble the front headlights of the Renault Kangoo MK1
How to disassemble the front headlights of the Renault Kangoo MK1
Renault Kangoo (1997-2008 / MK 1, KC, KW) In this video, we see how to remove the front headlights of the Renault Kangoo MK1: we open the hood and unscrew the two cross screws at the top near…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos