Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the low beam headlight bulb of the Renault Kangoo.

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Light bulb

See other generations:
Video tutorial

To replace the low beam headlight bulb on the Renault Kangoo I and II series, open the hood and locate the back of the headlight; rotate the plastic cover counterclockwise and pull it towards you. You will find the electrical connector with the bulb attached: press the plastic clip on the connector and pull it back without disconnecting the wires.

The bulb holder is held in place by a metal spring clip pressed against a hook: release it and move it completely to the side to remove the bulb.

Take the new bulb with gloves and insert it into the housing in the correct position. Reposition the retaining spring and then reconnect the electrical connector.

Before reattaching the cover, test the bulb to ensure it works; if it does, close everything up and proceed - if necessary - with the other side.


Posted on 5 December 2025 by ScegliAuto


Related tutorials

Replacement of the front headlight bulb of the Renault Kangoo
Replacement of the front headlight bulb of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Let’s briefly review the steps on how to disassemble and replace the headlight bulb of the Renault Kangoo. First, we open the vehicle's hood and star…
How to replace the headlight bulbs in a Renault Kangoo?
How to replace the headlight bulbs in a Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this tutorial, we will see how to replace the headlights bulbs in the Renault Kangoo, a very simple and quick operation. First of all, let's make …
How to Replace the Number Plate Bulb on a Renault Kangoo II
How to Replace the Number Plate Bulb on a Renault Kangoo II
Renault Kangoo (2007-2021 / MK 2, FC, FW) Let's see how to replace the number plate light on a Renault Kangoo II. If we are only replacing the halogen bulb, start by opening the rear hatch; l…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos