Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulbs in a Renault Kangoo?

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, we will see how to replace the headlights bulbs in the Renault Kangoo, a very simple and quick operation. First of all, let's make sure that the instrument panel is off, so we can operate safely.

Then, we open the hood and remove the large cover located at the back of the headlight in question. Next, we disconnect the power connector, remove the rubber cap, and extract the old bulb by releasing the metal clip.

At this point, all that’s left is to insert the replacement bulb and reassemble everything by following the reverse procedure.


Posted on 5 December 2025 by ScegliAuto


Related tutorials

How to Remove Headlight Bulbs on Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) Replace the front headlight bulbs on a Renault Kangoo. Open and lift the front bonnet. Using a suitable screwdriver, remove the plastic cover at the …
How to disassemble the front headlight of the Renault Kangoo
How to disassemble the front headlight of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) These short and simple steps will allow us to disassemble and replace the front headlight and its bulbs of the Renault Kangoo. First, we open the hoo…
How to replace the rear light bulb of the Renault Kangoo
How to replace the rear light bulb of the Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) Today we will explain how to replace the rear headlight bulb of a Renault Kangoo. First, open the rear doors and unscrew the two locking screws by ha…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos