Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulb of the Renault Kangoo

Model: Renault Kangoo MK 1, KC, KW - Years 1997-2008
Part: Tail light bulb

Today we will explain how to replace the rear headlight bulb of a Renault Kangoo. First, open the rear doors and unscrew the two locking screws by hand, rotating them counterclockwise. After removing the screws, remove the headlight by pulling it outwards. Then disconnect the damaged bulbs from the connector and proceed with the replacement. After replacing the bulbs, insert the headlight and lock it by screwing the screws clockwise. Turn on the vehicle lights to test the bulbs, if they do not work, it may be necessary to replace the fuse related to them.

Posted on 24 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb on a Renault Kangoo
How to replace the rear headlight bulb on a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today, I will explain how to independently replace the rear headlight bulb on a Renault Kangoo. Open the boot and remove the side carpet cover where …
Replacement of the rear fog light bulb of the Renault Kangoo
Replacement of the rear fog light bulb of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) The following steps will show us how to disassemble and replace the rear fog light bulb of the Renault Kangoo. First, let's move to the rear of the v…
How to Replace the Rear Light Bulbs on a Renault Kangoo
How to Replace the Rear Light Bulbs on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Below are the instructions that will allow you to remove and replace the rear light bulbs on a Renault Kangoo. First, open the rear doors of the vehi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos