Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Headlight bulb

Let’s briefly review the steps on how to disassemble and replace the headlight bulb of the Renault Kangoo. First, we open the vehicle's hood and start by disconnecting the electrical connector of the low beam bulb, then removing the rubber cover; after that, we unclip the metal spring, thus removing the bulb from the optical group, as shown in the video. At this point, we install the new low beam bulb, similarly replacing the other lights as well; let’s check their operation and finally secure the rubber cover.

Posted on 20 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Renault Kangoo
How to replace the front headlight bulb of the Renault Kangoo
Renault Kangoo (2020-2026 / KFK, MK 3, FFK) The steps to replace the front headlight bulb of a Renault Kangoo are simple and quick to perform independently. The first step is to pull the lever …
How do you replace the headlight bulb of the Renault Kangoo?
How do you replace the headlight bulb of the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) To replace the headlight bulb of the Renault Kangoo, you will need to access the inside of the wheel arch where the headlight is located: you will ne…
Replacing the headlight bulb on a Renault Kangoo
Replacing the headlight bulb on a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) As soon as you notice that the headlight bulb on your Renault Kangoo has blown, you must replace it immediately for your safety. Open the bonnet and …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos