Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear fog light bulb of the Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Fog lights

The following steps will show us how to disassemble and replace the rear fog light bulb of the Renault Kangoo. First, let's move to the rear of the vehicle and start by unscrewing the fixing screws of the rear light, disconnecting the electrical connector of the bulbs to remove it; then separate the bulb holder from the light fixture and remove the fog light bulb, as shown in the video. At this point, install the new bulb, with the same fitting, then reassemble the rear light and connect it!

Posted on 7 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear fog light of the Renault Kangoo
How to disassemble the rear fog light of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today's information will show us how to disassemble and replace the rear fog light bulb of the Renault Kangoo. First, let's move to the back of the v…
How to Install Front Fog Lights on a Renault Kangoo
How to Install Front Fog Lights on a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today, you will learn the instructions to install the front fog lights on a Renault Kangoo in simple steps. First, remove the front bumper by unscrew…
How do you replace the rear fog light on a Renault Kangoo?
How do you replace the rear fog light on a Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) It will be possible to replace the rear fog light of the Renault Kangoo by opening the rear hatch, allowing the screws that secure the headlight asse…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos