Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Bulbs on the Renault Kadjar

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Light bulb

On the Renault Kadjar, the replacement of the dipped beam bulb is carried out from the engine bay, working behind the front optical unit. After opening the bonnet, locate the rear area of the affected headlamp and remove the plastic protective cover, which isolates the bulb from dust and moisture. Once access is opened, you can directly reach the bulb holder of the dipped beam. In the content, you will see the release of the electrical connector and the removal of the bulb from its seat, with a controlled movement, without forcing the supports. The used bulb is then extracted and replaced with the new one, ensuring it is inserted in the same orientation shown. After correctly positioning the new bulb on the Renault Kadjar, reconnect the connector and replace the rear cover of the headlamp until fully closed. The operation concludes with a final check of the lighting, ensuring the dipped beam functions correctly before closing the bonnet.

Posted on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Kadjar (2015-2022 / MK 1) Let’s briefly go through the instructions that will allow you to remove and replace the rear light bulbs on a Renault Kadjar. First, open the boot li…
Renault Kadjar (2015-2022 / MK 1) To adjust the clock of the Renault Kadjar, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: once t…
Renault Kadjar (2015-2022 / MK 1) Today’s main steps will show you the procedure for removing and replacing the front headlight bulbs of the Renault Kadjar. First, open the bonnet and…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos