Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seat on a Renault Trafic II

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Seat

See other generations:
Video tutorial

Here’s how to remove the rear seats from a Renault Trafic II: each bench is secured to the floor by 2 or 4 safety hooks, locked by a pin or a lever mechanism, located at both ends of each seat fixing rail, often covered by a small plastic cover. Insert a socket wrench into the central hole of the hook pin and push down firmly (on some models, you may need to rotate it 90°) until you hear a clear "click." This indicates that the locking pin has retracted.

Repeat this for all hooks on the bench, after which you can remove the seats.


Posted on 18 August 2026 by ScegliAuto


Related tutorials

Removing the Rear Bench Seats of the Renault Trafic
Removing the Rear Bench Seats of the Renault Trafic
Renault Trafic (2001-2014 / MK 2) In this brief guide, follow the steps to remove the rear bench seats of the Renault Trafic. First, open the rear doors and start by reclining the sea…
How to Remove the Rear Seats of a Renault Trafic?
How to Remove the Rear Seats of a Renault Trafic?
Renault Trafic (2014-2026 / MK 3) To remove the rear seats of a Renault Trafic, first, remove the headrests from all the seats. Once these are removed, you will also need to take out …
How to Reinforce the Seat of a Renault Trafic MK1
How to Reinforce the Seat of a Renault Trafic MK1
Renault Trafic (1980-2001 / MK 1) This video shows how to address the issue with the seat of the Renault Trafic (the same problem can also be found on the Nissan Primastar and the Ope…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos