Do it yourself
Frequently asked questions about cars and motorcycles

How to Reinforce the Seat of a Renault Trafic MK1

Model: Renault Trafic MK 1 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Seat

See other generations:
Video tutorial

This video shows how to address the issue with the seat of the Renault Trafic (the same problem can also be found on the Nissan Primastar and the Opel Vivaro), where the outer edge sags, losing its firmness. To fix this, use a wooden board placed at the bottom of the seat, resting it at the back.

At the front, there is a cut where the board can be placed to make the seat stiffer; the correct measurements were taken with a stick that was then measured, ensuring it rests on the supports between the springs and remains firm under the seat.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

Renault Trafic (2001-2014 / MK 2) Before you begin, open the side door of your Renault Trafic. Start by unfastening the lower side hooks that secure the rear seats to the floor. Then,…
Renault Trafic (2001-2014 / MK 2) In this brief guide, follow the steps to remove the rear bench seats of the Renault Trafic. First, open the rear doors and start by reclining the sea…
Renault Trafic (2014-2026 / MK 3) To remove the rear seats of a Renault Trafic, first, remove the headrests from all the seats. Once these are removed, you will also need to take out …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos