Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate light of the Renault Kadjar

Model: Renault Kadjar MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: License plate light

Video tutorial

Today we will explain how simple and fast it is to replace the license plate light of a 2016 Renault Kadjar vehicle on your own. To replace the license plate light, we need to open the trunk and use a flat-head screwdriver to remove the light. Disconnect the connector from the bulb and perform the replacement by inserting a bulb of the same voltage.

After connecting the connector to the bulb, insert the light back into its housing. Close the trunk and test the operation of the bulb by turning on the vehicle lights.

If it does not work, it will be necessary to check the fuse.


Posted on 10 November 2025 by ScegliAuto


Related tutorials

How to Replace the Number Plate Light Bulb on a Renault Kadjar
How to Replace the Number Plate Light Bulb on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) The steps to replace the number plate light bulb on a Renault Kadjar are: - open the boot; - remove the lights using a flat-head screwdriver; - disco…
Replacing the Front Fog Light Bulb on Renault Kadjar
Replacing the Front Fog Light Bulb on Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Below are the instructions to remove and replace the front fog light bulb on the Renault Kadjar. First, move to the side of the vehicle and start by …
Where to find the VIN number of the 2015 Renault Kadjar
Where to find the VIN number of the 2015 Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) In this video, we can see where to find the VIN (Vehicle Identification Number) of the 2015 Renault Kadjar. The number is located by opening the fron…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos