Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light Bulb on a Renault Kadjar

Model: Renault Kadjar MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: License plate light

Video tutorial

The steps to replace the number plate light bulb on a Renault Kadjar are: - open the boot; - remove the lights using a flat-head screwdriver; - disconnect the connector from the light; - remove the cover on the light; - remove the bulb; - insert the new bulb; - reconnect the light to the connector; - place the light back into its housing; - close the boot.

After completing all the steps, go inside the vehicle to test the lights by starting the vehicle.

If the problem persists, it may be necessary to replace the corresponding fuse.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to replace the license plate light of the Renault Kadjar
How to replace the license plate light of the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Today we will explain how simple and fast it is to replace the license plate light of a 2016 Renault Kadjar vehicle on your own. To replace the licen…
Replacing the Front Fog Light Bulb on Renault Kadjar
Replacing the Front Fog Light Bulb on Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Below are the instructions to remove and replace the front fog light bulb on the Renault Kadjar. First, move to the side of the vehicle and start by …
How to Replace the Front Headlight Bulb in a Renault Kadjar?
How to Replace the Front Headlight Bulb in a Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) Replacing the right front headlight bulb in a 2021 Renault Kadjar is a very simple operation that can be done independently. The first step is to par…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos