Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Fog Light Bulb on Renault Kadjar

Model: Renault Kadjar MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Headlight bulb

Video tutorial

Below are the instructions to remove and replace the front fog light bulb on the Renault Kadjar. First, move to the side of the vehicle and start by detaching the wheel arch liner to access the fog light bulb.

Then disconnect the electrical connector of the light to remove the bulb, as shown in the video. At this point, install the new dipped beam bulb of the correct type and with the same fitting; reattach the wheel arch liner and, if necessary, replace the other fog light bulb in the same way.


Posted on 10 March 2026 by ScegliAuto


Related tutorials

How to replace the fog light bulb on the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) To replace the fog light bulb on the Renault Kadjar, you need to completely remove the front bumper of the car by unscrewing the screws that secure i…
Replacing the Front Headlight Bulb on the Renault Kadjar
Replacing the Front Headlight Bulb on the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) The following steps will guide you through the process of removing and replacing the front headlight bulb on the Renault Kadjar. First, open the bonn…
How to Replace the Front Headlight Bulb on a Renault Kadjar
How to Replace the Front Headlight Bulb on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Today, you will learn how to independently replace the left front headlight bulb on a Renault Kadjar S4. To replace the bulb, first open the front bo…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos