Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Kadjar
  6. : How do you change the fog light bulb on your Renault Kadjar?

Renault Kadjar - Video tutorial

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Fog lights
Operation: How do you change the fog light bulb on your Renault Kadjar?

In order to replace the fog light bulb of the Renault Kadjar it is necessary to completely disassemble the front bumper of the car, unscrewing the screws that block it to its housing: these screws are located in the lower part of the bumper, inside the wheel arches and in the front of the engine compartment. Once the bumper has been completely removed, it will then be possible to disconnect the connector connected to the corresponding fog light and extract the bulb inside it. This will need to be connected to the connector and inserted into the headlight, refitting the bumper.


Posted on 21 December 2022 by ScegliAuto

This video is currently unavailable


How to change the interior bulbs in Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) In this video we can see how to replace the front ceiling light bulbs in the Renault Kadjar. This is a very simple and fast operation, it is sufficie
Replacing the headlight bulb on the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Today we will see the step by step instructions to be able to remove and replace the headlight bulb on the Renault Kadjar first series. First of all
Replacement of the front headlight bulb of the Renault Kadjar.
Renault Kadjar (2015-2022 / MK 1) The following steps will illustrate the procedure for disassembling and replacing the headlight bulb of the Renault Kadjar. First, we open the engine

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos