Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Renault Scenic II

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Light bulb

See other generations:
Video tutorial

Let's see how to replace the front headlamp bulb on a Renault Scenic II: lift the car and turn the steering wheel fully towards the side where you need to work, to create enough space between the wing and the tyre. Remove the plastic cap; the bulb is not a bayonet type but has a clip fitting.

Disconnect the electrical connector and prepare the new bulb, taking care not to touch the glass with your fingers. The square tab must align with the corresponding recess on the headlamp.

Insert it into the slot, reconnect the electrical connector, remount the cap, and check the correct operation of the headlamp.


Posted on 4 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Renault Scenic?
How to Replace the Front Headlamp Bulb on the Renault Scenic?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To replace the front headlamp bulb on the Renault Scenic, open the bonnet to access the rear of the headlamp that needs the bulb replaced. Here, you …
Removing the Front Headlamp Bulb from a Renault Scenic
Removing the Front Headlamp Bulb from a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Let's see how to remove the front headlamp bulb from a Renault Scenic. Lift the front bonnet of the car and locate the front headlamp bulbs. Find the…
How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) This guide outlines the steps to remove and replace the front headlamp bulb on a Renault Scenic, following the instructions below. First, open the bo…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos