Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Centre Brake Light on a Renault Scenic 3

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part:

See other generations:
Video tutorial

To replace the brake bulb on a Renault Scenic 3, follow these general steps. Open the boot of your vehicle.

Remove the plastic cover that protects access to the rear light bulbs. This may require removing screws or clips.

Disconnect the brake light bulb connector. Remove the faulty bulb by twisting or pulling it out, depending on the type of fitting.

Insert the new bulb, taking care not to touch the glass with your fingers. Reconnect the electrical connector to the new bulb.

Replace the plastic cover and ensure it is securely fastened.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

Where is the OBD Port on the Renault Scenic 3?
Where is the OBD Port on the Renault Scenic 3?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) If you want to locate the OBD port on your Renault Scenic Mk3 in just a few seconds, simply follow the instructions in this mini guide. First, enter …
How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To replace the bulb on a Renault Scenic, open the bonnet to access the components in the engine bay. Locate the bulb within the corresponding headlam…
How to Replace the Brake Light Bulb of the 2017 Renault Scenic
How to Replace the Brake Light Bulb of the 2017 Renault Scenic
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) In this guide for all Renault Scenic (2017) owners, we will describe the steps you need to take if you intend to replace the brake light bulb of one …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos