Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Renault Scenic

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

See other generations:
Video tutorial

To replace the bulb on a Renault Scenic, open the bonnet to access the components in the engine bay. Locate the bulb within the corresponding headlamp unit. Grip the bulb and turn it anti-clockwise to remove it from its socket, then insert the new bulb into its housing.

Once the new bulb is connected, close the bonnet to ensure everything functions correctly after the replacement.


Updated on 15 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (1996-2003 / ) Before starting, open the bonnet of your Renault Scenic. First, unclip and remove the rear cover of the blown bulb. Next, unclip the clip that secure…
How to Replace the Front Headlamp Bulb on the Renault Scenic?
How to Replace the Front Headlamp Bulb on the Renault Scenic?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To replace the front headlamp bulb on the Renault Scenic, open the bonnet to access the rear of the headlamp that needs the bulb replaced. Here, you …
How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Replacing the right front headlamp bulb on a Renault Scenic MK3 is a simple task that can be done in a few minutes. To carry out the replacement, ope…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos