Do it yourself
Frequently asked questions about cars and motorcycles

Which Switch to Replace if the Clock and Display on the Renault Scenic II Reset

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Clock

See other generations:
Video tutorial

On many Renault Scenic II models, the dashboard display may have a fault, causing the clock and settings to reset at each start, and the screen becomes completely black. The culprit is often a "mosfet", which is an electronic switch used to control the flow of current in a circuit.

Its code is IRF3710, and on Amazon, you can purchase a kit of 5 pieces for £7.99, with free delivery for Prime customers. This mosfet overheats and fails due to weak soldering.

To repair it, remove the dashboard panel and open the electronic board. Locate the mosfet on the back: often the area appears yellowed.

Instead of removing it directly (which is difficult), cut the connections from the board and solder the new mosfet externally, creating a small bridge with wires to the correct pins. Once replaced, reassemble the panel and start the engine.

The clock will keep the time, and the display will function correctly again. The repair is simple and cost-effective.


Posted on 16 July 2026 by ScegliAuto


Related tutorials

Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) For owners of the Renault Scenic, specifically the Renault Scenic 3, who do not know how to adjust the clock in their vehicle, the correct informatio…
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) The moments when we need to adjust the clock in our Renault Scenic, specifically the Renault Scenic 3 in this case, are the transitions from daylight…
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Below are the instructions to set the time on the central display of the Renault Scenic in simple and quick steps. First, get into the vehicle and na…

Other guides you may be interested in

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos