Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the third brake light on a Renault Kangoo

Model: Renault Kangoo KFK, MK 3, FFK - Years 2020-2026
Part:

In this video, we can see how to change the third brake light on a Renault Kangoo when needed: we open the door and see that there are two pins inside that we will need to remove. We will need a hook screwdriver to insert inside to loosen the clip, while we will pry from the outside with a plastic spatula once the clip has been released. This way we can remove the third brake light cover to which the bulbs are connected and we can change any that may have blown. Before putting everything back in place, we take the opportunity to clean the area well, and with the same hook screwdriver, we will close the clips from the inside.

Posted on 6 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the third brake light bulb of a Renault Kangoo 2
How to change the third brake light bulb of a Renault Kangoo 2
Renault Kangoo (2007-2021 / MK 2, FC, FW) Through today's video, we are shown the procedure for changing the third brake light bulb of a Renault Kangoo 2. So first of all, we need to open the…
Replacing the Third Brake Light Bulbs on the Renault Kangoo
Replacing the Third Brake Light Bulbs on the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Let's go through the steps to remove and replace the bulbs of the third brake light on the Renault Kangoo. First, open the rear tailgate and start by…
How to Remove the Third Brake Light and Replace the Bulbs on a Renault Kangoo
How to Remove the Third Brake Light and Replace the Bulbs on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Below are the instructions for removing and replacing the third brake light and its bulbs on a Renault Kangoo. First, open the rear tailgate of the v…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos