Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Peugeot Expert?

Model: Peugeot Expert Mark3, MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Headlight bulb

See other generations:
Video tutorial

To replace the front headlamp bulb on a Peugeot Expert, open the bonnet to access the internal components of the engine bay. Locate the cover panel of the headlamp assembly. Once this panel is removed, you can identify the bulb, which can be disconnected from its connector and pulled out from the headlamp assembly.

Connect the new bulb to the connector, ensuring it is properly seated in the headlamp and check that everything functions correctly.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

How to replace the front headlight bulb of the 2014 Peugeot Expert
How to replace the front headlight bulb of the 2014 Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) Replacing the headlight bulb of the 2014 Peugeot Expert is a simple and quick operation to be carried out independently. To perform the replacement, …
How to Replace the Front Headlamp Bulb on Peugeot Expert
How to Replace the Front Headlamp Bulb on Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) .. This video tutorial shows how to replace the front headlamp bulb on a Peugeot Expert. The replacement can typically be done independently.. …
How to Replace the Cabin Fan Resistor on a Peugeot Expert?
How to Replace the Cabin Fan Resistor on a Peugeot Expert?
Peugeot Expert (2008-2016 / Mark2, MK 2) To replace the cabin fan resistor on a Peugeot Expert, loosen the screws securing the glove compartment on the front passenger side: once the screws …

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos