Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Resistor on a Peugeot Expert?

Model: Peugeot Expert Mark2, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Blower motor

See other generations:
Video tutorial

To replace the cabin fan resistor on a Peugeot Expert, loosen the screws securing the glove compartment on the front passenger side: once the screws and clips holding the compartment are removed, you can proceed to completely remove the compartment and locate the components behind it. Once the fan is identified, detach the resistor located near it to insert the new one; finally, reassemble all components.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

Where are the Fuses on the Peugeot Expert?
Where are the Fuses on the Peugeot Expert?
Peugeot Expert (2016-2025 / Mark3, MK 3) On the Peugeot Expert, all fuses are located within designated fuse boxes installed in the vehicle. This type of vehicle has two fuse boxes. The firs…
Where Are the Fuses Located on a Peugeot Expert?
Where Are the Fuses Located on a Peugeot Expert?
Peugeot Expert (2016-2025 / Mark3, MK 3) The dedicated fuse boxes installed in the Peugeot Expert contain the fuses that control the operation of the devices mounted on the vehicle. In this …
How to Set the Time in a Peugeot Expert Van
How to Set the Time in a Peugeot Expert Van
Peugeot Expert (2008-2016 / Mark2, MK 2) In this tutorial, you will see how to set the time in a Peugeot Expert van, a very simple and quick operation, for example, after the switch to dayli…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos