Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment from a Peugeot Expert

Model: Peugeot Expert Mark2, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Glove compartment

See other generations:
Video tutorial

To remove the glove compartment from a Peugeot Expert, follow these steps: - Open the passenger door and remove the side cover of the dashboard. - Open the glove compartment and unscrew the four side screws of the compartment. - Remove the screw located in the side cover. - Remove the screw behind a cover near the compartment. - Detach the lower part of the compartment using a flathead screwdriver.

Once all the steps above are completed, you can pull the glove compartment out with some force.


Updated on 18 October 2026 by ScegliAuto


Related tutorials

Where Are the Fuses Located in the Peugeot Expert?
Where Are the Fuses Located in the Peugeot Expert?
Peugeot Expert (2016-2025 / Mark3, MK 3) The fuses in the Peugeot Expert are divided between two fuse boxes located within the vehicle. This model has two: one inside the cabin and one in th…
Where to Find the Fuses on a Peugeot Expert
Where to Find the Fuses on a Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) On the Peugeot Expert, the fuses are divided between two fuse boxes installed within the vehicle. One is located inside the cabin and the other in th…
How to Replace the Cabin Fan Resistor on a Peugeot Expert?
How to Replace the Cabin Fan Resistor on a Peugeot Expert?
Peugeot Expert (2008-2016 / Mark2, MK 2) To replace the cabin fan resistor on a Peugeot Expert, loosen the screws securing the glove compartment on the front passenger side: once the screws …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos