Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper Blade on the Peugeot 108

Model: Peugeot 108 MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Windshield wipers

Video tutorial

When transitioning from warm to cold months, it is necessary to replace your vehicle's wiper blades. Today, you will learn how to replace the rear wiper blade on the Peugeot 108. To carry out this operation, you need to: - lift the wiper arm; - detach the upper part of the wiper blade by lifting the clip and removing it; Once removed, you can insert the new one. To insert it, you must: - lift the lower part; - insert the wiper blade and slide it in; - close the clip; To replace the front wiper blades, the procedure is the same.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How to replace the engine air filter of the Peugeot 108
How to replace the engine air filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) The replacement of the engine air filter of your Peugeot 108 is undoubtedly one of the simplest operations you can perform independently on the vehic…
How to replace the air filter of the Peugeot 108
How to replace the air filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To correctly replace the engine air filter of your Peugeot 108, it only takes a few minutes. All you have to do is carefully read the following guide…
How to Replace the Cabin Filter of the Peugeot 108
How to Replace the Cabin Filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) If you want to replace the cabin air filter of your Peugeot 108 yourself, follow these steps. First, enter the car and reach the passenger seat. Open…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos