Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock on the Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Clock

The clock shown on the instrument panel of the Peugeot 206 can be reset by turning on the instrument panel, turning the key inside the corresponding block: at this point it will be possible to hold down the button located to the left of the display in the center of the dashboard. It will need to be held down until the hours start flashing: these can now be changed by repeatedly pressing the button to the right of the display. In this way, it will be possible to press the button to the left again, noting that the minutes will start flashing: these can be changed in the same way.

Posted on 26 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on a Peugeot 206?
How to Set the Clock on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To set the clock on a Peugeot 206, turn on the ignition so you can navigate the menu that appears on the central display: press and hold the button o…
How to Set the Clock on a Peugeot 206?
How to Set the Clock on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To set the clock on a Peugeot 206, turn on the instrument panel by rotating the key in the ignition. At this point, press and hold the button to the …
How do you set the clock on the Peugeot 206?
How do you set the clock on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To adjust the clock of the Peugeot 206, you need to turn on the instrument panel by inserting the key into the corresponding slot: once it is on, you…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos