Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Light Bulb on a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Tail light bulb

Below is the procedure necessary to independently replace the reverse light bulb on your Peugeot 307. First, ensure you have a new reverse bulb that is fully compatible with your Peugeot 307, then open the rear bonnet. At this point, remove the protective cover located on the side of the boot, then remove the safety hook and locate the bulb holder. Finally, remove the old faulty bulb and replace it with the new one.

Posted on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear headlight bulb of the Peugeot 307?
How do you replace the rear headlight bulb of the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) In order to replace the rear headlight bulb of the Peugeot 307, you need to open the rear hatch of the car, so that it is possible to completely deta…
How to Replace the Reverse Switch on a Peugeot 307?
How to Replace the Reverse Switch on a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) To replace the reverse switch on a Peugeot 307, open the bonnet to disconnect the cables connected to the battery terminals. Once the cables are remo…
How to replace the rear turn signal bulb on the Peugeot 307
How to replace the rear turn signal bulb on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) The following steps will show us how to disassemble and replace the rear turn signal bulb of the Peugeot 307. First, open the rear hatch of the trunk…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos