Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Peugeot 207

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Door trim panel

Need to carry out maintenance inside the door? Here’s how to remove the panel for access. Using a screwdriver, unscrew the screws located in the internal handle (remove the switch panel from the door panel). Remove the trim plastic near the door opening lever, unscrew the remaining screws on the door panel (on the sides) and detach the retaining clips. Finally, pull the panel away with your hands and disconnect it from the door (unplug the power wiring and the opening cable). Perform maintenance inside the door and then refit the panel.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door panel of the Peugeot 307
Disassembly of the front door panel of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Following these brief instructions, we will see how to disassemble the front door panel of the Peugeot 307. First, we open the front door and start u…
How to Remove the Door Panel of a Peugeot 307
How to Remove the Door Panel of a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To remove the door cover panel, use a lever to detach the plastic cover of the door opening handle, then use a screwdriver to unscrew the securing sc…
How to Remove the Right Door Panel on Peugeot 307
How to Remove the Right Door Panel on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Remove the right rear door panel on Peugeot 307: use a screwdriver to unscrew the screws located in the space of the upper door opening lever and the…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos