Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reupholster the Panels of a 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Door trim panel

How to reupholster the door panel of a Peugeot 207? First, remove the cover panel from above the door. Take off all the pieces to allow for the removal of the panel. Once the panel is removed, prepare to take off the upholstery from it. Cut the new upholstery to match the measurements of the old one. Fix the new upholstery onto the door panel (use suitable adhesive for installation). Refit the cover panel once the upholstery installation is complete. Secure the panel with all the mounting pieces.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean the EGR Valve of a Peugeot 207 1.6 hDi
How to Clean the EGR Valve of a Peugeot 207 1.6 hDi
Peugeot 207 (2006-2015 / MK 1) Before you can start, start the engine of your Peugeot 207 1.6 hDi, then open the bonnet. Begin by disconnecting one end of the hose connected to the…
How to Replace the Rear Light on a Peugeot 207
How to Replace the Rear Light on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you can start, open the tailgate of your Peugeot 207. Begin by moving the side carpet in the boot. Next, unscrew and remove the internal screw…
Where to Find the OBD Port of the Peugeot 207
Where to Find the OBD Port of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To locate the OBD port of your Peugeot 207, it only takes a few seconds. With the following guide, you will find it by following some simple steps. F…

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos