Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Bulbs on Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light bulb

Video tutorial

Open the boot and use a small flat screwdriver to remove the clip that secures the boot's inner lining to the bodywork. Move the inner lining aside to access the back of the headlamp.

Using suitable pliers, detach the plastic clip that holds the lamp from behind. At this point, you can pull the headlamp out of its housing and disconnect the connector.

Position the headlamp on a workbench: remove the internal part where the bulbs are fitted. Unscrew the affected bulb and lightly screw in the new one you have purchased.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

Replacing the Rear Lights on a Peugeot 206
Replacing the Rear Lights on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Do you want to replace the damaged bulbs on a Peugeot 206? Here’s how to remove the bulbs from inside the rear light. Open and lift the tailgate, det…
Replacing the Rear Light Bulbs of the Peugeot 206
Replacing the Rear Light Bulbs of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) These brief and simple steps will allow you to remove and replace the rear light bulbs of the Peugeot 206. First, open the boot and start removing al…
Replacing Headlight Bulbs on a Peugeot 206
Replacing Headlight Bulbs on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Need to change the damaged headlight bulbs on a Peugeot 206? Here’s how to replace them. Lift the front bonnet by pulling the lever located at the bo…

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos