Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the central console of the Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Body

Video tutorial

In this video we see how to disassemble the central console of the Peugeot 206: we will start by removing the plastic panel covering the hazard button, which is just pressure-fit, and can be gently lifted with a plastic spatula to remove it from its housing; we will then remove the electrical connector.

Behind the display we have another connector to remove, and two screws on the front to unscrew to remove it completely.

In this case there are bulbs to be replaced on the display, so we remove them from the back, turning them with pliers. Now we remove the entire frame around the radio and air conditioning vents, which can be easily removed because the screws are visible, and once the frame is removed it comes off easily, but it is always advisable to be gentle.

The vents are removed by setting them to zero and then pulling them towards us.


Posted on 22 May 2025 by ScegliAuto


Related tutorials

How to Remove the Air Vents from the Centre Dashboard on a Peugeot 206
How to Remove the Air Vents from the Centre Dashboard on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This video shows how to remove the air vents located in the centre dashboard of a Peugeot 206: using a plastic lever or screwdriver, detach the onboa…
Disassembly of the central tunnel of the Peugeot 206
Disassembly of the central tunnel of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this guide we will see the instructions that will allow us to disassemble and remove the tunnel or central console of the Peugeot 206. First of al…
Replacing Dashboard-Central Console Bulbs on Peugeot 206
Replacing Dashboard-Central Console Bulbs on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, you will see how to remove and replace the lights of the dashboard or central display on a Peugeot 206, following these simple steps. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos