Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the central tunnel of the Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Center console tunnel

Video tutorial

In this guide we will see the instructions that will allow us to disassemble and remove the tunnel or central console of the Peugeot 206. First of all, we get on board the car and start unscrewing the fixing screws located behind the plastic cover below the air conditioning controls; then we remove the gear lever gaiter, disconnecting it from the base, as shown in the video.

At this point we also remove the window switch panel, disconnecting the electrical connector underneath; we detach the handbrake lever gaiter to remove the central tunnel!


Posted on 29 December 2024 by ScegliAuto


Related tutorials

Replace Gear Lever on Peugeot 206
Replace Gear Lever on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the gear knob on a Peugeot 206, follow these steps. Use a plastic lever to detach the leather gaiter frame. Grip the knob and rotate it le…
How to Remove the Gear Knob from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Is the gear knob on your Peugeot 206 damaged? Here’s how to remove it from the shaft. Grip the knob and rotate it left and right until it comes off t…
How to Remove the Gear Knob on a Peugeot 206
How to Remove the Gear Knob on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Is the gear knob on your Peugeot 206 damaged? Let’s see how to remove it from the top of the centre console. Use a plastic lever to disconnect the le…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos