Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service in a Peugeot 307?

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Warning light – error code

Resetting the oil service in a Peugeot 307 is very simple. Follow these steps in this tutorial. This procedure should only be followed after completing the required maintenance work. First, insert the key but leave it in the initial position. Then, press the button located under the speedometer and, at the same time, turn on the instrument cluster. You will notice a countdown on the display; keep the button pressed until the time expires. Finally, turn off and turn on the instrument cluster again. If the procedure was successful, you will see "10000" as the service interval.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 307 Maintenance Reset
Peugeot 307 Maintenance Reset
Peugeot 307 (2001-2009 / MK 1) Let's see how to reset the warning light that appears on the information display of the Peugeot 307. Enter the cabin, press and hold the button as sh…
How to Reset the Service in a Peugeot 307?
How to Reset the Service in a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) Resetting the service in a Peugeot 307, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure that you hav…
How to Reset the Service Light on a Peugeot 307
How to Reset the Service Light on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To reset the Service light on a Peugeot 307, press and hold the button located on the right side of the display, near the speedometer. While holding …

Other guides you may be interested in

    Frequently Asked Questions

    • 307 2001-2009 - If the fuel warning light on my Peugeot 307 no longer works, where do I find the fuse box? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos