Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Service warning light

Resetting the service light on the display of your Peugeot 307 is very simple. To complete the operation, just carefully read the following guide and apply the described procedure. First, enter the cabin and sit in the driver's seat, then ensure the ignition is off. At this point, press and hold the button located between the display and the speedometer while simultaneously turning on the ignition. Finally, wait for the service light reset to complete and you are done.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on the Peugeot 307
How to reset the service indicator on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this new mini guide we will discover how to manually reset the service light of your Peugeot 307. To complete the operation, you just need to foll…
How to reset the service light on the Peugeot 307
How to reset the service light on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) When the service light comes on in the Peugeot 307, it means that the driver must carry out a complete check of the vehicle. After performing the ser…
How to reset the service light on the Peugeot 307
How to reset the service light on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To reset the service light related to the car service on the Peugeot 307, we first need to get into the vehicle and then press the TRIP A button loca…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos